How to Sew Curtains – Instructions for making a curtain Valance

You need not be a death sewing sewing tends to do. Sew curtains can be a very rewarding project. You must use a sewing machine, a calculator, paper and pencil, yard stick, tape measure, steel, fabric, needles, thread and scissors.

Instructions for making a simple curtain and valance:

1) the decision to change the color and texture of fabric that you want in your room. You can do this by going to the fabric store or check online stores. Before ordering or buying the fabric, youneed to measure the windows.

2) To the extent it is necessary first to decide how long you want Valance, and where you want the curtains of the window will be placed. Valance want a shorter, or that hangs half? Now is the time to use your creativity, and perhaps draw a sketch of how the tendency to look for references.

3) Now that you know what you want, measure from the top of the rise of the curtain to begin at the point where youThe Valance finished. Add 7 inches to this measurement for the upper and lower (3 inches above himself, and 4 inches of soil).

4) To measure lowering the curtain, measure from the top of the blanket will be placed on the window just above or below the threshold (whatever your preference, it's your show), add 7 inches to a few. Be sure to write down everything you need to remember. For the width, it is necessary to measureoutside molding outside. To purchase the materials on how the curtain track you want to be. If you have a normal swelling want, remember the window size is doubled. Curtains available in different widths, and find you have to make use of two panels of fabric, you get as close as possible to the point of reference for each panel can be necessary to cut the panels if it seems too broad.

5) E 'time to buy orMaterials. Want a substance that is easier to work with cotton works best.

6) You can pre-wash the material to be safe than be reduced. Cotton has a tendency to decrease, then you probably need to pre-wash before you open the curtains.

7) Now is the time to cut your material. Use the scale that makes a straight line with a pencil or crayon on top. The shop is not able to cut it to try to get the line straight as possible. Measuremode line Valance and after it is in a tent down. need four separate pieces.

Put the right side of fabric on a flat surface. Use the parameter to measure and Mark 3 inches from the top bar. Mark this line, so you know where the plane itself, do the same with him, but the bottom line was made 4 inches from the bottom. Use the same technique, mark 1 inch on both sides of the material for the final itself. When all pieces are marked, marketingOn the right side, sew the two pieces together Valance on the sides, making them a piece of hangings. Firmly press the seam with the iron. Now bend the two side seams are more than double, 1 / 2 cm at a time. Suture material for sewing to keep both sides of the needle of the machine to avoid the ring puck. The top and some are performed in the same way. Success will be a nail in 1 1 / 2 inches, and the fund will be 2 inches. The lower the curtain is sewn in the same way as a pelmet Apartyou will have two pieces on the bottom and the curtain will have to sew two seams on each side of the two panels.

You only managed to sew curtains for the house. I follow this pattern, you will be able to sew curtains for your home when you want.